Single Sensor or Network

The measuring sensors of the 3-AXIS MAGNETOMETER are based on Förster probes (fluxgates). The sensors are arranged so that the magnetic flux density is measured at the same measuring point for all three axes. The magnetometers are fitted with a digital port (RS 232 or CAN) for direct connection to a PC.

The 3-AXIS MAGNETOMETERS are used for applications such as the measurement and recording of the Earth's magnetic field and the long-term monitoring of the magnetic environment, such as prior to the installation of magnetically sensitive devices and systems. It is also possible to set up sensor networks for measuring complex 3D magnetic field spreads. The sensors can also read and record the magnetic signatures within the scope of the degaussing of maritime vessels and their components.

Your advantages at a glance

  • PC-controlled 3-axis fluxgate magnetometer
  • Analogue and digital probe interfaces
  • Multi-channel probe arrangements and networks
  • Single data or continuous measurement
  • Data acquisition and post processing software
  • Data base concept and data transfer interface

For more information on this product, please go to:

Technical Data

Measurement range: 100 µT
Resolution: 24 Bit ADC
Limit frequency: 1 kHz
Measurement uncertainty: ±0.5 % of the measured value
Sensor orthogonality ≤ 0.2°
Alignment sensor axis / housing: ≤ 0.25°
Noise: ≤ 35 pT/ √Hz@1Hz
Power supply:  +10 VDC to +28 VDC
Interfaces: RS232, CAN
Temperature range: -25 °C to +50 °C
Dimensions: 289 x 40 mm (LxD)
270 x 40 x 32 mm (LxWxH)
Weight: 0.6 kg
Protection grade: IP 68 - Basic IP 66