Standards

Compliance with international standards forms an important part of professional quality assurance and ensures the high quality of the end product. Units and systems by FOERSTER perform testing in accordance with these international standards to ensure that your materials and components meet the tough requirements.

Below is a selection of standards covered by FOERSTER test systems. Please do not hesitate to contact us should you wish to perform testing in accordance with any standards that are not listed.

Specifies the technical delivery conditions for steel tubes (housing, tubes, mechanical seals, and joint heads), coupling materials, and accessories. The requirements are also defined on three product specification levels (PSL-1, PSL-2, PSL-3).

Products that meet the standard

Comprises specifications for seamless and welded steel tubes for pipelines in the crude oil and natural gas sector. The specifications of API 5L correspond to ISO 3183.

Products that meet the standard

Specifies the technical delivery conditions for steel bore hole tubes with inverted tube ends and welded tool connections for drilling and production companies in the crude oil and natural gas sector.

Products that meet the standard

Describes the testing of oil drilling rigs for the detection of non-magnetic properties. The test method is based on the measurement of the magnetic residual field and relative permeability µr.

Products that meet the standard

Describes the ultrasound test method used for testing carbon and low-alloyed sheet steel and universal profiles and defines a quality classification.

Products that meet the standard

Specifies the ultrasound testing of steel plates with a vertical test head.

Products that meet the standard

Specifies the ultrasound testing of rolled steel plates for special applications with a vertical test head.

Products that meet the standard

Describes the method for testing ferromagnetic tube-shaped products using leakage flux.

Products that meet the standard

Comprise the standard and acceptance standards for ultrasound testing of rolled, fully deoxidized carbon steel plates and alloyed steel plates using the pulse-echo method with a vertical test head.

Products that meet the standard

Comprise the standard and acceptance standards for ultrasound testing of rolled and alloyed steel plates using the pulse-echo method with a vertical test head.

Products that meet the standard

Describes the method for determining the saturation magnetism of sintered hard metals.

Products that meet the standard

Describes the method for determining the coercitivity of sintered hard metals.

Products that meet the standard

Defines the acceptance threshold for discontinuities in sheet steel, strip, and universal plate, based on ultrasound testing.

Products that meet the standard

Describes the technical delivery conditions for hot-rolled steel bars and wire rod. The magnetic leakage flux method with probes is recommended.

Products that meet the standard

Describes the automatic ultrasound wall thickness testing of seamless and welded steel tubes (except submerged arc welded tubes) across the entire tube circumference.

Products that meet the standard

Describes the determination of the Coercitivity in the open magnetic circuit. Method B described above is advantageous as it provides the option to perform measurements regardless of the geometry of the sample. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the method of the automated leakage flux testing of seamless and welded ferromagnetic steel tubes (except submerged arc welded tubes) across the entire tube circumference for detecting longitudinal and/or transverse imperfections.

Products that meet the standard

Describes the general bases of eddy current testing.

Products that meet the standard

Contains criteria and guidelines for manufacturing, assembling, testing, commissioning, and maintaining tubing systems. A full ultrasound test of plates, strips, and tubes for laminar discontinuities is recommended and its requirements defined.

Products that meet the standard

Describes the ultrasound testing of flat steel products with a thickness of 6 mm or above (reflection method).

Products that meet the standard

Describes the ultrasound testing of sheet steel with a thickness of 6 mm or above (reflection method).

Products that meet the standard

Describes the ultrasound testing method for thick steel plate.

Products that meet the standard

Describes ultrasound testing methods for rolled plate.

Products that meet the standard

Describes the determination of the magnetic saturation dipole moment jS using moment coils in open magnetic circuits. The method described above is advantageous as it provides the option to perform measurements regardless of the geometry of the sample. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the automatic ultrasound testing of strip and plate used for the production of welded steel tubes for detecting lamination.

Products that meet the standard

Describes the ultrasound testing of flat steel products with a thickness of 6 mm or above.

Products that meet the standard

Specifies the requirements and test methods for steel tubes used for tuning system transport systems in the crude oil and natural gas sector.

Products that meet the standard

Specifies five non-destructive test and defect classification methods, such as the ultrasound testing of raw materials, replacement parts, and weld seams of metallic pressure tanks.

Products that meet the standard

Describes the ultrasound testing of steel plates for pressure tanks.

Products that meet the standard

Describes the ultrasound testing of flat steel products with a thickness of 6 mm or above (reflection method).

Products that meet the standard

Specifies the requirements for hot-molded seamless steel tubes.

Products that meet the standard

Describes the determination of the relative permeability µr in the range from 1.0 to 2.0 using the probe measuring method. The method described above is advantageous as it provides the option to perform measurements of materials and finished components directly on site. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the determination of the relative permeability µr in the range from 1.0 to 2.0 using the probe measuring method. The method described above is advantageous as it provides the option to perform measurements of materials and finished components directly on site. It is not required to manufacture special measuring samples.

Products that meet the standard

Describes the determination of the relative permeability µr in the range from 1.0 to 2.0 using the probe measuring method. The method described above is advantageous as it provides the option to perform measurements of materials and finished components directly on site. It is not required to manufacture special measuring samples.

Products that meet the standard

Specify the framework for the testing of non-magnetic tools for use in explosive ordnance disposal (EOD). The test method is based on the measurement of the magnetic residual field of the components to be tested using an absolute or gradient magnetometer. 

Products that meet the standard

Describes the ultrasound testing of steel plates for pressure tanks.

Products that meet the standard
This website uses cookies

We use cookies to personalize content and advertisements, to be able to offer functions for social media and to analyze access to our website. We also share information about your use of our website with our social media, advertising and analytics partners. Our partners may combine this information with other data that you have provided to them or that they have collected as part of your use of the services.

Our cookies have changed, so you will need to give your consent again.

Your previous consent to our cookies has expired, so you will need to consent again.

Necessary cookies help to make the website usable for the user. They store basic information, such as a login to the website or the consent to the individual cookies.

Name Provider Purpose Duration Type
__hs_opt_out HubSpot notwendig

This cookie is used by HubSpot to ensure that a user after an opt-out does not have to ask for consent again.

13 months Cookie
__hs_do_not_track HubSpot notwendig

This cookie is used by HubSpot to disable the tracking of a user.

13 months Cookie
__hs_initial_opt_in HubSpot notwendig

This cookie is used by HubSpot to store the consent to tracking.

7 days Cookie
hs_ab_test HubSpot notwendig

This cookie is used by HubSpot to always assign a user to the same group during A/B tests.

Session Cookie
*_key HubSpot notwendig

This cookie is used by HubSpot to prevent a user from having to log in multiple times for the same content.

14 days Cookie
hs-messages-is-open HubSpot notwendig

This cookie is used by HubSpot to save chat widget settings.

30 minutes Cookie
hs-messages-hide-welcome-message HubSpot notwendig

This cookie is used by HubSpot to ensure that the welcome message of the chat is displayed once a day.

1 day Cookie
__hsmem HubSpot notwendig

This cookie is used by HubSpot to store the login process of a user.

1 year Cookie
hs-membership-csrf HubSpot notwendig

This cookie is used by HubSpot to prevent a login process from being corrupted.

Session Cookie
hs_langswitcher_choice HubSpot notwendig

This cookie is used by HubSpot to store the language selected by the user.

2 years Cookie
__cfduid HubSpot notwendig

This cookie is used by HubSpot to securely transfer data via CDN / Cloudfare.

Session / 30 days Cookie
__cfruid HubSpot notwendig

This cookie is used by HubSpot to securely transfer data via CDN / Cloudfare.

Session Cookie
gits_cookie_accepted_* digiwerk GmbH

Saves the cookie banner selection.

unlimited LocalStorage
DataTables_* TYPO3

Is stored by the CMS system TYPO3 vebSaves user settings for displaying data in the backend.

unlimited LocalStorage
t3-tabs-* TYPO3

Saves user settings for displaying data in the backend.

unlimited LocalStorage
be_typo_user TYPO3

Required by the CMS system TYPO3 to allow users to log on to the backend.

1 year LocalStorage
PHPSESSID TYPO3

Required by the CMS system TYPO3 to allow users to log on to the backend.

1 year Cookie

Marketing cookies help to recognize visitors to websites. This enables, among other things, to show them more accurate advertisements and search results.

Name Provider Purpose Duration Type
__hstc HubSpot

This cookie is used by HubSpot to register a unique ID that can be assigned to statistical data of the user.

13 months Cookie
hubspotutk HubSpot

This cookie is used by HubSpot to register a unique ID that can be assigned to statistical data of the user.

13 months Cookie
__hssc HubSpot

This cookie is used by HubSpot to detect the session of a user.

30 minutes Cookie
__hssrc HubSpot

This cookie is used by HubSpot to detect the session of a user.

Session Cookie

Statistical cookies help to understand how visitors interact with the site by collecting and reporting information anonymously.

Name Provider Purpose Duration Type
_pk_id.*.* Matomo

This cookie is used by Matomo to store some details about the user, such as the unique visitor ID.

13 months Cookie
_pk_ses.*.* Matomo

This cookie is used by Matomo, for short-lived cookies, which are used for temporary storage of data for the visit.

30 minutes Cookie
_pk_testcookie..undefined Matomo

This cookie is used by Matomo to check whether the visitor’s browser supports cookies

Session Cookie

Cookies are small text files that are used by websites to make the user experience more efficient.According to the law, we can store cookies on your device if they are absolutely necessary for the operation of this site. We need your permission for all other types of cookies.This site uses different types of cookies. Some cookies are placed by third parties that appear on our pages.